Acopian Bird Savers are a relatively inconspicuous (visible, but not unsightly) way to prevent bird crashes, guaranteed. They’re a light curtain of strings that wave in the wind, in front of your windows – so birds don’t mistake them for trees or sky.
They have a Build-Your-Own tutorial on their website; if you need a more custom solution or just want the materials done right from the get-go, you can order it from them online.
It’s fairly easy apply decals and UV liquid (remember, only useful for some bird species, not all!) by leaning outside and doing it, but the real fix — Feather Friendly — requires access and time to apply it properly. Feather Friendly is probably the most effective solution out there, and it’s meant to last. It’s easy to apply when you live on the ground floor, but not at higher floors. But higher floors still need effective protection.
That means many apartment dwellers and homeowners who don’t have access to an extension ladder might find it troublesome to prevent birds from crashing into windows. (And because they don’t notice the crashes, they doubt they occur.)
I wrote this to help people who either have casement windows or modern sash-hung windows where you can tip the window inward in order to clean it. You need to be able to access the top of the frame of the window on the outside. Also, this DIY fix is affordable, and as it’s not a permanent alteration to the dwelling, you don’t need your landlord’s permission to use them.
In short: a few weeks ago, I was looking at some supplies I had, and I had an “A-ha!” moment:
Cord conduits are used to hide the unsightly collection of modem, ethernet, and speaker cables snaking around your internet and home entertainment systems. (If you also happen to have pet rabbits, then you’ll have a few more than your average home. It’s no fun when the Internet goes down because a rabbit gave it a curious “What’s this for?” nibble.)
I had extra cord conduits I was no longer using, and I realized how easy it would be to install real bird-strike prevention on my upper story windows, if only I solve the backing sticky-tape problem.
Easy! Scrape off the old sticky tape – the cushioned kind – because it’s no longer adherent. This left a rough, soft residue on the backside of the cord conduits, which may help with the adherence of new two-sided tape.
The only question, which time will tell, is how durable the installation will be.
Also: cord conduits are easily paintable with exterior latex paint, so they can feasibly blend into your window frames. In the back of my house, the window frames are white, but in front they are beige. Of course I’m interested in matching! Matching is very fashionable. One must keep up with appearances.
So instead of writing a to-do list, here’s a gallery of steps. I recommend looking at the images here with their captions, and if you need the detail of what it’s showing, click the thumbnail and it will expand to the full photograph (some thumbnails presently appear sideways):
If anything’s unclear in this example, please drop me a comment, and I’ll rewrite it to clarify!